|
End View of Winter Enclosure
(3140 views)
The Winter Enclosure is a simple, easy to install system with no small parts to misplace. Seen here are a list of components and their relative placement on the Heavy-Duty scaffold.
Prices:
(A)Base Fixture-$85
(B)Winter Enclosure 9' Section-$115
(C)Tower-to-Beam Adapter-$55
(D)Winter Enclosure Top Beam-$143
(E)Behind-the-Wall Adapter-$65
March 20, 2008
|
|
Winter Enclosure Base Fixture
(3120 views)
Here is shown the interface between the Winter Enclosure and the Heavy-Duty Base Tower. The attachment is strong and secure, providing a stable foundation for the Winter Enclosure system.
March 20, 2008
|
|
Base Connection
(2044 views)
The enclosure structure can be attached to the base tower as shown here, or rest on the ground using a leveling jack.
February 11, 2010
|
|
Top of Winter Enclosure
(3278 views)
This view shows how the main beam attaches to the top of the scaffold tower using the tower-to-beam adapter.
March 20, 2008
|
|
Picking Up The Tower
(2474 views)
The structure is assembled on the ground and put in place with your forklift.
February 12, 2010
|
|
Ready for the Poly
(2174 views)
The towers with enclosure structure decked and stocked with materials - ready to go to work. The enclosure sections are also legal to climb. You can use them to access the platform anywhere along the length of the scaffold.
February 12, 2010
|
|
Side View
(2108 views)
Starting on the Ground. You never run a wall scaffold-high and move your men with Non-Stop.
February 12, 2010
|
|
Installing the Plastic
(2065 views)
February 12, 2010
|
|
Poly installed
(2107 views)
The enclosure is constructed of round tubing. Use standard wind clips to attach your poly.
February 11, 2010
|
|
End View
(1891 views)
End view of poly.
February 11, 2010
|
|
Enclosure Behind The Wall
(1912 views)
The enclosure can stop against an existing structure, or go over the wall and back down to the ground.
February 12, 2010
|
|
View from Inside the Enclosure
(1782 views)
February 12, 2010
|
