Main Menu




NEWSLETTER

We periodically publish a newsletter with product improvements, job stories, pictures submitted by customers, and all sorts of good info. SUBSCRIBE HERE.

Photo Highlights

Non Stop Scaffolding > Photo Gallery > > WORKHORSE Job Pictures

Photo Gallery

2 Frames High (4480 views)
This condo in New Orleans has a one-story brick front and Hardie Board on up. It required two frames and an attachable ladder. They had to stop and hop boards twice to top out.

When they started using Workhorse, they set it up BEFORE starting the wall, and NEVER STOPPED ONCE until the wall was topped out.

They saved two "plank hops" and increased production by 34%.

February 12, 2010
Put the Scaffold in first (5709 views)
Always put WORKHORSE in place FIRST, before the first piece of material is laid. The masons start the wall off the scaffold and never move until the wall is topped out. (Running a wall scaffold-high and moving your men kills about 20 minutes of production time.)

February 12, 2010
Topped Out (5004 views)
Here the wall is topped out and the Laborers' Platform has been removed.

Earlier, the laborers filled the masons' workbench with enough materials to top out, and then removed  the laborers' platform. After that, they threw mortar up with a shovel.

With just the WORKHORSE base tower you see here, the bricklayers' feet will be 8'-3" above the base. Add about 9" for the leveling jacks, and they can stand 9 feet high and comfortably top out a 13-foot wall with only the base unit.

WORKHORSE builds walls 30% faster than frames because your men never stop and they are always waist-high.

February 12, 2010
Jacking Up (4764 views)
No winches or cables. WORKHORSE jacks up in 1-3/4" increments like a truck jack. A simple jack handle moves from tower to tower to quickly raise the masons and their workbench.

February 15, 2010
14-foot Wall (4682 views)
WORKHORSE puts your masons at exactly the right height for the work at hand.

February 15, 2010
3800-lb capacity (4567 views)
Land full pallets of block, 400 brick, or full tubs of mortar on the Laborers' Platform. WORKHORSE can take it. You have 4 planks for stocking. Max. 3,800 lbs. (Never overload your boards.)

February 15, 2010
End View (4938 views)
The Laborers Platform has 4 boards - three 16-footers behind the tower, and a standard Non-Stop cut board between the towers - plenty of material stocking room.

February 15, 2010
Easy Access (4733 views)
Every tower is legal to climb.

February 17, 2010
Inside block work (4036 views)
Using only the 9'-7" Base Tower, your masons stand 8'-3" above the floor - high enough to top out walls as high as 14 feet inside. Add an extension if you need it and they stand 12'-6" above the floor.

February 15, 2010
1314 Hoadley St. | Shreveport, LA 71104 | 800.845.0845

Powered by Majicko1.4.0! 2007-2012 Shreveport Web Design by Bandwise LLC